Thread: Where Do You Route Yours??

I'm referring to the Scottoiler feed tubing, I'm going to have to replace mine for the fourth time I have routed it down by the chain and under the swing arm, I used a thick cable tie to secure it, but it's not worked and the chain has worn it through. Where do you route yours fellas??

Do you really want me to tell you where to route it shorty

FFS there's alway one! think I might have to book a hotel for July.

Originally Posted by DG

FFS there's alway one! think I might have to book a hotel for July.

If you don't, it's going to be like staying at the Bates' Motel

Don't get in the shower!

Originally Posted by SuperEnduro Rob

If you don't, it's going to be like staying at the Bates' Motel

Don't get in the shower!

If shorty has a shower he'll need a rubber ring

Down the right side of frame to swingarm, underneath, then between lower part of chain slipper and swingarm, then along underside of swingarm.

Originally Posted by KevInYorks

Down the right side of frame to swingarm, underneath, then between lower part of chain slipper and swingar, then along underside of swingarm.

+1

Or is this what you're 'really' asking?

It looks like there is a cable tie around the swing arm this will only pull the pipe in towards the rusty old chain your running...........drill some 1/8 holes in the bottom chain guard at an angle then use small cable ties sorry zip ties too hold the pipe ...then drill 2 1/8 holes one above the other in the bottom sharks fin the width of the pipe and use more small cable ties do this twice to make it neat