Fitted the stainless spacers in the stand today......first time the stand has returned on its own without me having to give it a lift.
www.lairy.co.ukThe journey is more important than the destination!
950 Adventure (Current)
R1 (Awesome, stunning, widow maker)
RSV1000 (Beautiful but Deceased, very nearly widow maker)
VF1000R (Stylish but HEAVY)
VFR750 (Best 'road' allrounder ever)
VF1000F (Better than you'd think)
CB900F (Tank, spanked but refreshed)
GS550E (Nice at the time)
X7 (Dangerous and fragile, pistons, cranks, jetting)
CB125T (Transport for spotty youth)
PUCH MAXI !!!!!!!!!!!!(Only for the desperate)
Cheers mhsnowy. I can have some more spacers made up as I have purchased the stainless steel bar, but I will need a few orders first, all about numbers. The first two I had made were double the price of the KTM ones, now 5/12 of the price.
Guys I am down to the last couple of Adv locaters with more promises than relocaters, sorry it’s going to be first come first served. If people are committed I will have some more made up, but it’s quite an expensive exercise and there is a minimum amount I can have made or the price would be at least double, four or five just isn’t viable. If I receive more orders I will go ahead and have some more made, about 2 week’s turnaround.
Update: Sorry for the delay, I got the new SE/Adv Side Stand plates back today; they are with the millers and then off to the powder coaters, been told they will be ready to go on Monday.
I have made some small improvements to the relocaters due to 03-04 customisations. Thanks to you guys for all the feedback, it’s been tops having constructive positive results. Will post some more pics asap.