Thread: Air line fittings

I bought a tyre inflater/gauge for my compresser but the fittings are different, I can't see any size markings on any of the fittings.

ImageUploadedByTapatalk1340008845.243625.jpg

ImageUploadedByTapatalk1340008863.707848.jpg

ImageUploadedByTapatalk1340008895.759208.jpg

The thread size is different as well, as I tried to swap. If any one has an idea as to what fitting I would need it would be appreciated.

Thanks



Sent from my iPhone using Tapatalk

Here's a pic of the fitting on the left that fits my compressor with the new one (that doesn't) ImageUploadedByTapatalk1340010271.347678.jpg


Sent from my iPhone using Tapatalk

looks very cool

Most of the cheap stuff comes with the weird quick fit. The thread should all be 1/4 bsp taper. You can get the other fittings at places like Machine mart in Southampton or APM in Kings Somborne.

Originally Posted by Farmernd

Most of the cheap stuff comes with the weird quick fit. The thread should all be 1/4 bsp taper. You can get the other fittings at places like Machine mart in Southampton or APM in Kings Somborne.

Yea it was cheap, lol.
The problem is that the thread in the pressure gauge is differant to the fitting that fits my other accessories & I don't know what it is to be able to sorce a new fitting ( if you know what I mean )



Sent from my iPhone using Tapatalk

Airline Fittings - Machine Mart

If you have a machine mart local just take the two bits in to show them, they'll find you the right bit

Machine mart although not local seems to be the only place with stock i could walk in & try, thanks for the input guys

Where are you? Any brg, agricultural supplies, bolt supplies, engineering type place may have them

I have had both types of quickfit connectors on stuff I've bought - but never with different threads though!
As above, Machine Mart seem to have a wonderous selection of airline connectors and couplers and our local one seems to employ folk who know their onions.

just jubilee clip a short piece of air line with the correct fitting to the inflator