KTM Owners Forum banner

exhaust

  1. Adventure
    Hi Looking for some advice on best options for engine remap. I've recently fitted a KN air filter + GPR Furore Carbon on my 1290 SAS. Up to 5k RPM the new can works well, lots of torque, but struggles at higher RPMs, engine stops pulling and the fuel mixture feels very lean so pretty sure it...
  2. 950/990 Supermoto
    Bought my SMT at the end of last year. Came as standard except Arrow pipes. My KTM dealer couldn't tell if it had been mapped to suit the exhaust; is there a way of finding out?
  3. Adventure
    Can anyone advise on using one of my current Akrapovic can for a change to a 2-1 exhaust set up for 2012 990 adventure? I would ideally like to simply purchase a 2-1 y-piece from Remus and utilise my existing pipe work and end can without the cost of purchasing a new/additional can. Im not...
  4. New Member Introductions
    Hi All, Just bought my first KTM ('11 RC8) and absolutely loving it! - Only thing I want to change is the sound as the stock sounds a bit asthmatic.. Been searching for a while now and can't really find anything good (or anything at all)! - does anyone have any recommendations or links to any...
  5. General Discussion
    Dear KTM team, I am working in a project and I would need your help. If you have a motorcycle that is between 3 years old and new, please send me pictures of the exhaust or linked pipes showing any surface damages that you might not be happy with. These could be due to corrosion, heat...
  6. SuperDuke
    Not got a date for delivery of mine yet so need the help of an existing owner with a little GT related project (more accurately, help me to help someone else). What's needed are some good clear hi-res photos of the electrical connectors for the exhaust servo motor - pics of the male and female...
  7. Bikes and Bits for sale
    £360 + p&p Super light weight titanium exhaust system for KTM Adventure 1050 and 1090. Comes with carbon fibre heat shield. It saves a massive amount of weight at less than 3kg compared to the 11kg of the original monster can. Cost £740 new from Infinity Motorcycles. In almost as new...
  8. Supermoto
    Hi Guys, I am looking for an exhaust change on my KTM 690 Supermoto and am trying to work out if the exhaust from a 690 duke 12-16 will fit. Below is the exhaust i am debating. Any thoughts on whether it will fit my SM? The engine is the same but i am curious about mounts and just general...
  9. Bikes and Bits wanted
    STILL Wanted. Slip-on or Bolt-on exhaust Akra, Wings or Leo Vince JCE, Fuel Let me know what you have and price you're advertising Thanks Chris
  10. Bikes and Bits for sale
    Hi guys! Below you can find a list of Yoshimura exhaust we have for sale at our shop for ridiculous low prices. Due to a stock move, we have to part with these rather quick so we give a great discount on them. All exhaust are full systems. The stainless steel/aluminium ones can go for €250...
  11. Bikes and Bits for sale
    For Sale near Heathrow Airport. Very good condition. 077 1048 7499 £650ono
  12. Off-Road / Enduro
    Hi there, this is my first time on this forum or any forum at all! So if I've done something wrong please tell me! I have a 2008 exc 250 2t, my question is will expansions from earlier years fit on my bike with no hassle as the FMF gnarly is a good £50 cheaper for the older bikes! Cheers, Ben
  13. Bikes and Bits wanted
    I'm after a pair of cans for my 2006 LC4 640 Prestige. Anything considered. I am rebuilding the bike after it developed a bottom end knock. I ve decided to give the bike a good going over and will be doing a lot of work to it. I could also be tempted to buy the following: New Piston...
  14. Off-Road / Enduro
    Thinking about getting a replacement end can as opposed to full system. Will it make much of a difference? Quiet one as its for the lanes! Read various opinions on various forums and there seems to be a mix of opinions on the REAL benefits over the stock.
  15. RC8 Superbike
    Can anyone help? Ive got a Jester68 exhaust and I'm after a DB killer for it. anyone know where I can get one that fits straight off without any bending and cutting? Many Thanks
  16. RC8 Superbike
    Hi everyone, I've got an RC8 which I love apart from when my Mrs starts her Duc 749 and I can't here mine anymore. I don't have the cash for an Akra so looking at the other options available, the only thing that looks like it's good is the JC Exhaust. Having listened to the clips on youtube...
  17. Bikes and Bits for sale
    Hi, im selling the Superduke so I have some parts available. PM if interested... Rich KTM Superduke 990 Parts Power Commander 3 inc O2 Eliminators - £130 + £5 P&P Carbon Fibre Hugger - £70 + £5 P&P Akroprovic titanium exhaust - £395 + £15 P&P (excellent condition with baffles and all...
  18. Off-Road / Enduro
    Well mine arrives next month but i dont know what to do about the exhaust and map, i have a wings end can off my old 2012 smcr and i want to put that on but there is no akro map yet or even tuneecu (not like i would have any idea how to use it but if that was the only option then i would learn...
  19. Bikes and Bits for sale
    Sc project titanium exhaust with carbon end cap for a 690 smcr, it hasnt covered very many miles. Maybe 150 miles, its just got a light covering of suit on the inside, and a small scratch from where the clamp has been. Cost €410 new Wanting £310 incl postage.
  20. Off-Road / Enduro
    Hi all! Was going to get my bike dyno'd but the guy at the shop said he couldnt due to the exhaust! I have 02 excf with the twin header exhaust, he suggested I buy a second hand SX system off ebay but the only ones I can see have single headers! HELP!! Am I looking for sx or should I be looking...
Top