690 Duke front fork foot and slider:
In the picture above, the mud/grime is "cracked" between the silver slider and the black cast foot. It's cracked because the foot is everso slightly loose.
I've only seen this since I took the wheel out, so the forks are no longer pulled tight...
KTM 450 SXF CC forks setup for 690 Enduro R
2011 model bought from a very well-known suspension tuner on here (original emails available to show scope of work) and currently valved/sprung for the 275mm travel of the KTM 690R with a 65kg pilot.
Very nice fork and noticeable smoother and more...
On my 2013 690 Duke, one of my front forks has an odd widening of its diameter near the middle.
* At the top the circumference is about 160 mm.
* In the middle, the diameter is about 171 mm.
Is this propa f0cked?
That's just the left one, not taken the other out yet. I broke a 45 mm...
KTM has commenced the global recall of specific models from the 2015 model year, of which around 750 models from the UK and Ireland are affected.
Due to a supplier production fault, KTM is checking the torque setting of a nut between the fork’s piston rod and screw cap, within the 4CS fork...
Can the fork dust seals be replaced in-situ by removing the Brembo caliper mounts from the bottom of the forks?
How easy is it to remove said mounts - are they just held on with the single screw at the rear of the casting?
Have been trying to source the following part without success from various KTM dealers, here and in Germany. The part is on back order.
SXS03540400 Fork bottom reduction kit
I have an 09 450 EXC and want to put a Supermoto front wheel that has a 20mm spindle. My bike has the 26mm spindle...