Search Results for ‘ktm’

I'm getting old,,,, anyone know of any company's that do conversion from clip ons to straight bars on my RC8

Hello everyone, I was just doing some maininance on my KTM EXC 525 2004. Was going to adjust my valves, and as they do in every youtubevideo, they take off the spark plug and use a straw to find the Top end centre. I did not have a straw, so I was dumb enough to put a pencil in there and it went...

Hi chaps, 2014 ktm sxf 250 throttle position sensor part number 77741077044 Anyone close to Newcastle upon Tyne got a working TPS i can try on my bike to see if it eliminates a problem or does anyone have a cheap one i can buy thats working correctly? I dont have a voltage meter or the...

2013 KTM 350 Freeride. 1100 miles, good condition, MOT’d.

It’s struggling to get 60mph I got 68 downhill but that was a push any ideas KTM 125 DUKE 2017 (I’ve now removed rev limit lights and runs a lot smoother)

Has anyone weighed his/her KTM 990 SMR with full tank? What was the result?

AKRAPOVIČ "SLIP-ON LINE" KTM PowerParts Number: Seven6905999000 • Plug & Play mounting • Materials and knowledge derived from Akrapovič’s involvement in the racing world • Improved throttle response and increases in both power and torque • Designed to get the best performance from...

I just bought the KTM SXF 250 2011. Everything is perfect except one thing, it is very hard to start it in cold weather. I have to kick is to many times... I found out that removing the temperature sensor helps with starting, but not always. Yesterday i had to kick it like 50 times till it...

Hello everyone, I am Juan, new in the forum. I bought a ktm 690 smc r 2016 last summer. I have "succesfully" rebuild the motor (new piston and cylinder nikasil plating), I have been riding it few weeks but not more than 10-20 minutes as after this time when the motor reaches the working temp...

Hi, I have a ktm duke 125 that I bought a few weeks ago. I picked the bike up with a known fault of not being able to engage any gear. I knew that it would probably need an engine strip down. Long story short, some of the piston had broken and a fragment was stuck in the gears. Cleared it all...

https://www.ebay.co.uk/itm/194333542085

Hello im new here and new in the Ktm world. I purchased couple of weeks ago Ktm GS 250 1993 model and i have been trying to find used parts for it but i am not sure which models cross with GS. Because there is not much used parts for GS around but there is lot of 1990-1995 other models so can...

Hi all, I’m looking for a header midpipe for a 2003 KTM SXC. Must be in very good condition..... no corrosion if possible would be ideal. Selling my brothers bike (RIP) on behalf of my mother. Living in Ireland. Complete newby to KTMs and this forum. Any guidance would be really really...

I have a ktm 50 sx 1995 in good condition but don’t know we’re to get parts or what parts will fit this bike and does any one know the value of these bikes?? Thanks

Preferable street pants that are waterproof and they need to be over the boot, if you have something please don't hesitate to reply.

Hi I've owned the ktm duke 125 16 for a week now but when accelerating or putting on throttle when stationary ie just after idle it makes a sort of blowing high pitch sound but I can't work out where its coming from. It doesn't sound like its the engine but to do with the air system/exhaust. My...

I'm so missing traveling on the SuperDuke but trying to keep busy - Hot off the Mac, my favourite creation to date, tenuously glued together with digital love. Don't take it too seriously, it's just me being arty for fun. Are you like me? - missing the freedom to sod off and wing it on a...

Read a bit about KTM 250 EXC insurance, I don't really care about riding "illegally" but will i be able to get insurance on the bike without hassle? And if not is they a way I can restrict the bike but have it in a place where I can easily take the restriction out and put it back in if i was...

posted this in the Superduke section as that's my particular KTM interest but thought I should repost here so all and sundry can see...

Hi. My son have a sx50 16mod. The bike dont want to rev more than 11.500rpm. I have change stator,coil,new piston. Clean the carb and all the nozzle. When i clean the carb i see it missing the «nozzle skirt» on the main jet. Why it missing i dont know,previous owner maybe? I tought i have find...