KTM Owners Forum banner
  • Hey everyone! Enter your ride HERE to be a part of November's Bike of the Month Challenge!
wheel
1-10 of 10 Results
  1. General Discussion
    Morning, I’m new to the forum and am the happy owner of a brand new Duke 390, bought from a uk dealer earlier this month. There was a bit of a wait but when it came in it turned out there was a cosmetic problem with the rear wheel. They think some resin from the crate had got on the paint and...
  2. Bikes and Bits wanted
    Looking for a second set of wheels for my 2010 690 enduro 21/18" set. I have a set of SMC wheels that I could do a swap for if your looking for a some 17".
  3. Bikes and Bits wanted
    I have a bent rear hub so I'm on the lookout for either a replacement hub or rear wheel, I may even buy a full wheelset if the seller needs to get rid of both.
  4. Bikes and Bits wanted
    Hi, New bearings are loose in my rear wheel. I guess they must have seized & spun in the housing causing wear. So I'm looking for any off road 18" wheel that will fit the bike. Clearly it has to be in reasonable nick, as the MOT is due. Cheers, John
  5. General Discussion
    Hi all, I took the rear wheel out to fit a new tyre and was significantly pissed off by how difficult it is to remove. I can't maneuver the wheel enough to release the rear caliper from its post on the swingarm and so there is no clearance between the rim and and the caliper. As a result I've...
  6. Supermoto
    Hi guys, Does anyone know the brand of the OEM wheel weights? I'm trying to find some that are narrow enough to fit on my Enduro wheels and the ones on the SMCs that I've seen look like they'd fit the bill but I just can't seem to find them. Thanks very much!
  7. Bikes and Bits for sale
    Up for sale are my spare set of wheels which I bought about 18 months ago and never used. They fit my 2004 Exc and I would imagine they fit plenty of other years. Black excel rims with the usual wear and tear, nothing a bit of shoe polish wouldn't fix! ;) Also have a knackered front wheel which...
  8. Bikes and Bits wanted
    Hi all, after a new rear wheel / pair of wheels for a 450EXC. After Good/mint condition with or without tyres. email [email protected] or PM on here cheers Jon
  9. Supermoto
    Any suggestions for a reputable London based wheel builder? Preferably not out in the styx ;) Any help much appreciated, G
  10. Adventure
    If you're fitting wheels from a 950 on to a 990 then the only difference is that one of the rear spacers is bigger on the 990. Instead of being Polo-shaped, it's conical. If you don't swap the spacers you'll trap the ABS sensor and the wheel won't turn. Don't ask me how I know, I just know -...
1-10 of 10 Results
Top