KTM Owners Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
198 Posts
Discussion Starter #1
Does anybody know if there is a circlip holding in the piston on the clutch master cylinder on a 1290 Superduke?

Looking at the parts fiche the repair kit does not show a circlip.

Does anybody know and if there is one what size is it?

Chris... :)...
 

·
Registered
Joined
·
316 Posts
If it’s the same as the 1190 adventure unit I don’t think they’re serviceable, I asked ktm for a service kit and nothing showed up on the system apart from the rubber boot surrounding the push rod.
All I managed to do was remove the master and give it a good clean and flush it through. I did stripped and cleaned the slave and now have a great clutch again.
 
1 - 2 of 2 Posts
Top