KTM Owners Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
3,791 Posts
Discussion Starter #1
anyone know if halfords sell an allan key big enough for the 950 front spindle on a 1/4 inch drive so i can use my torque wrench or is this a KTM special tool ?

cheers
 

·
Registered
Joined
·
338 Posts
Funny you should mention it, I was planning to wander to Halfords and try and get one, along with a torx bit for the brake calipers. Will let you know if I make it down tomorrow lunchtime.
 

·
Registered
Joined
·
3,791 Posts
Discussion Starter #4
ok so Halfords is a no go. can anyone give me a link to a good online tool supplier where i could get a Alan key socket for the front spindle ?
 

·
Registered
Joined
·
2,387 Posts

·
Registered
Joined
·
3,791 Posts
Discussion Starter #6

·
Registered
Joined
·
338 Posts
Couldn't get down until today. Bought a 12mm hex bit on 1/2" drive for £7.49. Was lifetime guaranteed "professional" series. They also do the Tx45 Torx bit (on 3/8" drive) for the front calipers, but they were out of stock.
 
1 - 7 of 7 Posts
Top