KTM Owners Forum banner

1 - 13 of 13 Posts

·
Registered
Joined
·
15,371 Posts
Discussion Starter #1
Just need some stainless bolts for the engine case and various other places, why do KTM not put stainless bolts everywhere ! Same on the DUKE

I also need spome smaller bolts for where the grab rail is, I'm gonna take it off, suggestions please . . .

Lastly, a friend was telling my about some resrictor type system in lower gears and I should have it removed ???
 

·
Registered
Joined
·
5,561 Posts
Try ebay. A few ppl there sell stainless bolts. Just give them the specs of what size bolts you need. Replaced a great many on my adv. Cost me about 15 quid IIRC.
 

·
Registered
Joined
·
1,902 Posts
Before i removed mine the bike would stall on the odd occasion ..After removal the stalling disapeared and it ran much smoother ...Its all emmision rubbish thats not needed unless you want to save the world:D...
 

·
Registered
Joined
·
15,371 Posts
Discussion Starter #10
Before i removed mine the bike would stall on the odd occasion ..After removal the stalling disapeared and it ran much smoother ...Its all emmision rubbish thats not needed unless you want to save the world:D...
Mine stalled last night, do you reckon it's the EPS thingy majobby ???
 
1 - 13 of 13 Posts
Top