Evening all, nice simple one here. I have some fork springs that were taken out after suspension work. They have no markings/numbers on them. Am I right in thinking they are standard. Want rid but need to know what I am advertising. Cheers all.
Nokkaz
Joined
·
4,584 Posts
You’ll need a spring that you know for defo what the NM is and is the same length with the same number coils to compare to the unknown spring. Measure the coil thickness with a caliper, if one spring coil has a 5.1mm thickness and you know that to be a 4.6nm spring then a 5.5mm measured coil will almost certainly be a 4.8nm spring. The difference in thickness between weights of springs is a fraction of a mm.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
