KTM Owners Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
1,667 Posts
Discussion Starter #1
Right been following the last battery thread due to having to charge my battery every 3rd ride...:censored:

But today I charged my battery (ytz7s-bs) and nothing!!!:confused: Not even a click or buzz.

When the battery is charged it reads 12v when in the bike it reads 10v.
When pushing the elec start there is no change in voltage and when the bike is running still 10v...

The battery was in the bike when I got it.


Any advice welcome as I have a race on Sunday and I really do not wanna be kick starting my bike.:frown:
 

·
Registered
Joined
·
246 Posts
sounds similar to a fault i had with the sv and it was the rev rec..
 

·
Registered
Joined
·
3,694 Posts
Mebbe the battery needs replacing - get a Yuasa, the best MDSBattery.co.uk (I think you can get these discounted via the forum, check out the specials section).

Poor earthing is a common problem, not sure in your case, but worth making sure all the connections are clean - especially neg terminal to frame.
 
1 - 9 of 9 Posts
Top