KTM Owners Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Bike of the Month Challenge!

1 - 6 of 6 Posts

·
Registered
Joined
·
49 Posts
Discussion Starter #1
Am I right in saying the rc8 turn signals are 9v ? If so is it possible to use 12v turn signals on and how ?
 

·
Registered
Joined
·
189 Posts
I believe the turn signal circuit is actually 6v
This means that 12v LED signals don't work properly and 12v bulb ones are dim.

Apparently 'Oxford Nano' OF368 do work. Maybe someone else can confirm...
 

·
Registered
Joined
·
2,309 Posts
It's a 8Volt system. Don't ask why. It's a KTM thing.
 
  • Like
Reactions: Damien

·
Registered
Joined
·
153 Posts
I believe the turn signal circuit is actually 6v
This means that 12v LED signals don't work properly and 12v bulb ones are dim.

Apparently 'Oxford Nano' OF368 do work. Maybe someone else can confirm...
I can confirm. Had a set fitted, they work perfectly on the Rc8/R, straight out of the box.

Very bright and the correct flash rate (without fitting the additional load resistors which are included).

I did have a new unused set for sale here just the other day, but they have been sold
 
1 - 6 of 6 Posts
Top