KTM Owners Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
New member here... And got in trouble already.

Following advice on this forum, I was troubleshooting the battery charging issue, which I have traced to the Voltage Regulator connector under the seat - the plug was corroded to dust :).

In attempt to repair the issue, I've decided to cut the connector/plug off, to solder the wires directly - and yes, you guessed it, I didn't take a proper picture of which wire goes where...
After cursing my owners manual, I eventually got hold of Repair Manual with wiring diagram... Only to learn that bloody "T20 Voltage Regulator" wiring colour coding is not shown!

Could someone share a decent photo of the regulator connector/plug or tell me how do these wires connect?
Also, why do we have 4 wires out of rectifier?

FYI:
Regulator (SH830AA) Side Wiring: Red, Black, Green, White
Plug side wiring: Red/White, Brown, White/yellow(?), White/Black

ktm.png
 

·
Registered
Joined
·
9,050 Posts
1 - 4 of 4 Posts
Top