KTM Owners Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
194 Posts
Discussion Starter #1


I’ve taken the whole exhaust off my 950sm and I want to clean it up and make it presentable once again, what’s the best thing to do? Attack it with over cleaner and Barry Scott juice and a lot of elbow grease or go for something like high temperature paint or even ceramic coating?

Any (relevant) advice welcome!
 

·
Premium Member
Joined
·
31,502 Posts
Replace it with a full Ti Akra system ;)
 

·
Registered
Joined
·
194 Posts
Discussion Starter #3
If only! I could probably get a full custom exhaust and a dyno session for the price of one of those bad boys!
 

·
Premium Member
Joined
·
31,502 Posts
Green Scotchbrite pad (scouring pad from Supermarket) and Traffic Film Remover or multi-surface cleaner (from Supermarket)
 

·
Registered
Joined
·
193 Posts
here here.. wd40,scotch brite ,rags and a bit of elbow !
 

·
Registered
Joined
·
9,896 Posts
I used an angle grinder and flap disc on this CRF header. This took ages. Fook doing yours by hand you'll be there for weeks.

 

·
Registered
Joined
·
194 Posts
Discussion Starter #10
I think ill give the angle grinder and flap wheel a go first of all, see how i get on.

Cheers guys
 
1 - 11 of 11 Posts
Top