[jaymee]

what size wheels do I want for my LC4 640, I have the option of 3.00 or 3.50 for the front, which should I go for and why?

also can I get a 5.00 in the rear? or does it need to be a 4.50?

thanks

 

[KevInYorks]

3.50 front and 5.00 rear will fit the LC4
You have to be a bit careful with tyre choice to avoid chain rub

 

[jaymee]

I have just got a set of SM wheels, The rear fits, but the front hub is too large for the axle, I was wondering if I could swap the hub from my existing front wheel into the SM wheel, they both have 36 spokes, anything else I might need to consider?

My mate has contacts for a wheel builder, but I dont know how much it'll be, is this a job best left to the pros?

 

[NoelA]

Not sure what you mean by its too big width or bore, but if its the bore you could either swap the bearings or get a spacer kit.

 

[jaymee]

sorry, the bore is too large, where would I find a spacer kit??

 

[9trumpet9]

I might well have a suitable hub - could maybe do a swap? I'll pm you my number.