So I've owned my Gen3 for around 8 months now, just under 2000 miles and I've encountered a few things which aren't really issues but stuff that I think other riders need to be aware of, basically a little heads up.
1. The gear linkage on the spline can work loose, some loctite and retorquing sorted that one
2. If you fit the evotech tail tidy the plate light wires are the wrong way around, i.e. black to white, white to black
3. The pillion seat release cable has recently started to pop out of the plastic housing making it inoperable, I've fixed this with a dab of glue from the hot glue gun to hold the cable in the holder
4. I've had a knocking/clunking sensation on the front end, it was noticeable under braking which made me believe it was discs, but then I noticed it was happening anytime more recently, but only over certain bumps. Upon investigation the headstock bearings needing a quick nip up, something I wouldn't expect so early on in ownership
Hope this helps someone
1. The gear linkage on the spline can work loose, some loctite and retorquing sorted that one
2. If you fit the evotech tail tidy the plate light wires are the wrong way around, i.e. black to white, white to black
3. The pillion seat release cable has recently started to pop out of the plastic housing making it inoperable, I've fixed this with a dab of glue from the hot glue gun to hold the cable in the holder
4. I've had a knocking/clunking sensation on the front end, it was noticeable under braking which made me believe it was discs, but then I noticed it was happening anytime more recently, but only over certain bumps. Upon investigation the headstock bearings needing a quick nip up, something I wouldn't expect so early on in ownership
Hope this helps someone