Ordered one for my Christmas for my 2023 300SX… TBI kit with medium head (high not advisable for soft sand), ERM (impractical and risky to ship the ECU from UAE to Oz), also comes with the bits and pieces plus an iridium plug.
You get one map with the ERM and others available to download at a cost. There’s also Pro and Pro+ options for access. V2 firmware comes with basic tuning included. Can adjust fuel, ignition and PV in increments 0-30 and WOT ranges. Pro gives you power commander level resolution, Pro+ gives you the sort of access best left for dyno experts.
Going to download the MX map for green and have a tinker with the white one.
Notes say head gives 1.2mm squish with a 0.6mm head gasket… will need to baseline and test… will also need to order some gaskets just in case. 🤪 I think when ordering their heads they ask for the squish up front… but in the rush to get my order in before they shut for the features (and Mrs Claus changes her mind…🤭) I’d forgotten to ask them that in my TQs about the kit and remote support. 🙃
Biggest blocker will be getting the gaskets before middle to end of January if it’s miles off. Waiting on the local KTM dealer coming back and will figure it out / panic buy before Friday. 😅😅😅
Their kits look like the bollocks and the ERM looks like a cool tuning tool… will have fun messing about with it. 🤓
Updates and feedback to follow here… 🥳🎅🏻✊💨💨💨
You get one map with the ERM and others available to download at a cost. There’s also Pro and Pro+ options for access. V2 firmware comes with basic tuning included. Can adjust fuel, ignition and PV in increments 0-30 and WOT ranges. Pro gives you power commander level resolution, Pro+ gives you the sort of access best left for dyno experts.
Going to download the MX map for green and have a tinker with the white one.
Notes say head gives 1.2mm squish with a 0.6mm head gasket… will need to baseline and test… will also need to order some gaskets just in case. 🤪 I think when ordering their heads they ask for the squish up front… but in the rush to get my order in before they shut for the features (and Mrs Claus changes her mind…🤭) I’d forgotten to ask them that in my TQs about the kit and remote support. 🙃
Biggest blocker will be getting the gaskets before middle to end of January if it’s miles off. Waiting on the local KTM dealer coming back and will figure it out / panic buy before Friday. 😅😅😅
Their kits look like the bollocks and the ERM looks like a cool tuning tool… will have fun messing about with it. 🤓
Updates and feedback to follow here… 🥳🎅🏻✊💨💨💨