I enquired about this some time ago, someone said they was, but nothing happened, I may have to make my own.

 

Hi Guys,
Someone on the ABR forum made some under seat trays but there were issues with the rear tyre fouling and the plan sees to have died. To add some tools to my existing KTM tool kit I used some foam under the seat and a few additional items in behind the tail light.
The photo explains this better than I can.

Cheers

andy
https://www.dropbox.com/s/6ee06cpkzxpxatg/2016-07-28 18.19.48.jpg?dl=0

 

That's probably what I'll end up doing, it's just for tyre levers etc.

 

i have taken the bit off in that photo in front of your ktm tool kit, frees up quite a bit of space, but if you have the alarm your knackered.

as for tyre levers i have mine tucked in the bash-plate bit at the front

 

I imagine his ABS unit is in there.

 

If your doing the foam thing. Use closed cell foam as it doesn't absorb water.

 

Yes the ABS is still fitted but switched off, full size tyre levers are bolted into the bash plate cos I hate using small tyre levers if I get a flat on the trail.
Great idea removing the ABS cover for maore space I'll give it a try.
Cheers

 

Somebody over on ADVRider was doing them - he was in Canada I think ! I had one on my 990 and found it useful. Some people did report clearance issues when riding hard (or rather landing hard) offroad but never a problem for me.

 

So glad I have junked the ABS, so much storage space now, but might still make the tray.

 

Buy a 1190 and stick a complete set in the exhaust

 

TBH I've got rid of the abs and the air box so plenty of room but it's the larger items like levers etc

 

Looks very different to mine...

 

The 950 doesn't have the ABS